PRECISION ELECTRONIC INDUSTRY SOLUTION

With the continuous development of science and technology, mobile phones and other portable wireless equipment in order to adapt to all kinds of environment in outdoor use, these products must have the function of waterproof and anti-dust; But there are a large number of electronic components in electronic devices,components will be caused bigger influence(easy aging higher,failure rate etc.)because of temperature change on it, so the electronic device cooling problem is to be solved, and the processing of these problems will have to need a good plan and good products to meet……
 
Solution:To install the waterproof breathable membrane or breather valve
Waterproof breather valve just as its name implies is that it can waterproof and breathable; that is mean the gas can go through freely when there is dfifferential pressure between the inside and outside of  the product. Just like we usually speak breathing,so commonly known as breather valve.

In the encloser casing with breather valve (or assemble waterproof breathable membrane),let it unicom the inside and outside. When the internal pressure is greater than the outside during the device is working,the gas will external discharge;at the same time,interior heat will be also taken away;The internal pressure is less than the external pressure once the device lay-off,gas will through internal,but the external water(or dust) can’t into the interior,so as to achieve balance the inside and outside pressure, equal temperature and watertight.
 
一、Product performance

1、Good waterproof and dustproof:IP65―IP68;

2、High breathability  

3、Hydrophobic ,anti-oil

4、High strength of structrue,stable performance   

5、Strong chemical inertness    

6、Exellent ageing resistance

7、Endure extreme temperature    

8、Low cost

二、Main advantages of product

1、High efficient breathability:a、Can keep original sound quality  b、Rapid Balance the inside and outside differential pressure,so as to reduce the manufacturing cost of form seal structure c、Fast balance the inside and outside temperature difference to reduce the failure rate,prolong service life and reduce the cost of heat dissipation structure.

2、High waterproof and anti-dust performance grade:prevent water,oil,dirt etc into the form interior to protect the interior electronic component,improve the response speed of electronics, reduce the failure rate,and prolong service life.

3、Easy installation:reduce the complexity of the form structure; simplify the process of installation.